3 Electrical Installation
36
YASKAWA ELECTRIC
TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
■
Wire Gauges and Tightening Torque
Use the tables in this section to select the appropriate wires and crimp terminals.
Gauges listed in the tables are for use in the United States.
Note: 1.
Wire gauge recommendations based on drive continuous current ratings using 75°C (167°F) 600 Vac vinyl-sheathed wire assuming
ambient temperature within 40°C (104°F) and wiring distance less than 100 m (328 ft.).
2.
Terminals B1, B2, -, +1, +2, and +3, are for connecting a DC link choke, braking resistor or DC power supply. Do not connect other
nonspecific devices to these terminals.
• Consider the amount of voltage drop when selecting wire gauges. Increase the wire gauge when the voltage drop is
greater than 2% of motor rated voltage. Ensure the wire gauge is suitable for the terminal block. Use the following
formula to calculate the amount of voltage drop:
Line drop voltage (V) =
×
wire resistance (
Ω
/km)
×
wire length (m)
×
current (A)
×
10
-3
• Refer to instruction manual TOBP C720600 0
for braking transistor option or braking resistor option wire gauges.
• Use te1 and the negative terminal when connecting a regenerative converter or a regen unit.
• Use terminal B1 and - terminals when installing the braking unit to the drives with built-in braking transistor (2
0008
to 2
0115, 4
0005 to 4
0060, and 5
0003 to 5
0041).
•
Refer to UL Standards Compliance on page 224
for information on UL compliance.
Yaskawa recommends using closed-loop crimp terminals on all drive models. UL/cUL approval requires the use of
closed-loop crimp terminals when wiring the drive main circuit terminals on models CIMR-LU2
0085 to 2
0415 and
4
0045 to 4
0260. Use only the tools recommended by the terminal manufacturer for crimping. Refer to
Crimp Terminal Size on page 231
for closed-loop crimp terminal recommendations.
The wire gauges listed in the following tables are Yaskawa recommendations. Refer to local codes for proper wire gauge
selections.
3
TOEP_C710616_38H_7_0.book 36 ページ 2015年11月11日 水曜日 午後7時40分