C Standards Compliance
224
YASKAWA ELECTRIC
TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
◆
UL and CSA Standards
■
UL Standards Compliance
The UL/cUL mark applies to products in the United States and Canada. It indicates that UL has performed product testing
and evaluation, and determined that their stringent standards for product safety have been met. For a product to receive
UL certification, all components inside that product must also receive UL certification.
Figure 96
Figure 105 UL/cUL Mark
This drive is tested in accordance with UL standard UL508C and complies with UL requirements. To ensure continued
compliance when using this drive in combination with other equipment, meet the following conditions:
Installation Area
Do not install the drive to an area greater than pollution degree 2 (UL standard).
Ambient Temperature
IP00 enclosure with top protective cover: -10 to +40
°
C (14 to 104
°
F)
IP00 enclosure: -10 to +50
°
C (14 to 122
°
F)
Main Circuit Terminal Wiring
Yaskawa recommends using closed-loop crimp terminals on all drive models. UL/cUL approval requires the use of UL
Listed closed-loop crimp terminals when wiring the drive main circuit terminals on models CIMR-LU2
0085 through
2
0415, 4
0045 through 4
0605, and 5
0032 to 5
0200. Use only the tools recommended by the terminal
manufacturer for crimping.
are Yaskawa recommendations. Refer to local codes for proper wire
gauge selections.
Table 62 Wire Gauge and Torque Specifications (Three-Phase 200 V Class)
Model
CIMR-LU
Terminal
Recommended
Gauge
AWG, kcmil
Applicable Gauge
AWG, kcmil
Screw
Size
Tightening Torque
N
m (lb.in.)
2
0008
R/L1, S/L2, T/L3
14
14 to 10
M4
1.2 to 1.5
(10.6 to 13.3)
U/T1, V/T2, W/T3
14
14 to 10
–, +1, +2
–
14 to 10
B1, B2
–
14 to 10
10
14 to 10
2
0011
R/L1, S/L2, T/L3
12
14 to 10
M4
1.2 to 1.5
(10.6 to 13.3)
U/T1, V/T2, W/T3
14
14 to 10
–, +1, +2
–
14 to 10
B1, B2
–
14 to 10
10
14 to 10
2
0014
R/L1, S/L2, T/L3
10
12 to 10
M4
1.2 to 1.5
(10.6 to 13.3)
U/T1, V/T2, W/T3
10
14 to 10
–, +1, +2
–
14 to 10
B1, B2
–
14 to 10
10
14 to 10
TOEP_C710616_38H_7_0.book 224 ページ 2015年11月11日 水曜日 午後7時40分