Documentation Center
RAK19012 Quick Start Guide
Prerequisite
What Do You Need?
Before going through each and every step on using the RAK19012 WisBlock USB LiPo Solar Power Slot Module,
make sure to prepare the necessary items listed below:
Hardware
RAK19012 WisBlock USB LiPo Solar Power Slot Module
WisBlock Base board with Power Slot
Li-Ion/LiPo battery
Solar charger
Software
Arduino
To add the RAKwireless Core boards to your Arduino Boards Manager, install the
Product Configuration
Hardware Setup
RAK19012 should be attached to the power slot connector of WisBlock Base board with power slot. It is a power
board that provides the same features and interfaces that standard WisBlock Base boards provide - USB C
connector, battery and solar panel connector, LED indicators, and reset button.
⚠
WARNING
RAK19012 only supports WisBlock Base boards with Power Slot. It is not compatible with all WisBlock
Base boards.
For more information about RAK19012, refer to the
RAK19012 Connection to WisBlock Base board with
Power Slot
