7.1 Section Safety
YASKAWA ELECTRIC
TOEP C710656 10B YASKAWA Power Regenerative Unit - R1000 Instruction Manual
127
St
an
dar
d
Co
nfi
g
u
ra
ti
o
n
D
evi
c
es,
P
er
ip
h
er
al
D
evi
ce
s,
a
n
d
O
p
ti
on
s
7
NOTICE
Observe proper electrostatic discharge procedures (ESD) when handling the unit and circuit boards.
Failure to comply may result in ESD damage to the unit circuitry.
Do not use unshielded cable for control wiring.
Failure to comply may cause electrical interference resulting in poor system performance. Use shielded, twisted-pair
wires and ground the shield to the shield ground terminal E (G) of the unit.
Check all the wiring to ensure that all connections are correct after installing the unit and connecting any other
devices.
Failure to comply could result in damage to the unit.
Do not operate damaged equipment.
Failure to comply could result in further damage to the equipment.
Do not connect or operate any equipment with visible damage or missing parts.
TOEP_C710656_10B_1_0.book 127 ページ ２０１５年１月８日 木曜日 午後８時５５分
