YASKAWA CIMR-RA Series, Instruction Manual

Page: 130 / 209

130 YASKAWA ELECTRIC TOEP C710656 10B YASKAWA Power Regenerative Unit - R1000 Instruction Manual
7.4 Standard Configuration Devices Wiring
7.4 Standard Configuration Devices Wiring
Install the standard configuration devices listed below when installing the regenerative unit.
Refer to the product catalog for selection of standard configuration devices.
• Power Coordinating Reactor
• Current Suppression Reactor
• Fuse
• Fuse Holder
◆
Wire Gauges and Tightening Torque
Use the Table 7.2 to select the appropriate wires and crimp terminals for power coordinating reactor, current suppression
reactor, and fuse holder.
Note: Wire gauge recommendations based on continuous current ratings using 75 ° C 600 Vac vinyl-sheathed wire assuming ambient
temperature within 40
°
C.
Consider the amount of voltage drop when selecting wire gauges. Increase the wire gauge when the voltage drop is
greater than 2% of motor rated voltage. Ensure the wire gauge is suitable for the terminal block. Use the following
formula to calculate the amount of voltage drop:
Line drop voltage (V) =
×
wire resistance (
Ω
/km)
×
wire length (m)
×
current (A)
×
10 -3
Table 7.2 Wire Gauge and Torque Specifications
Model Terminals
For Asia
<1>
For U.S.A.
<2>
For Europe and China
<3>
Screw
Size
Tightening
Torque
N  m
Recomm.
Gauge
mm 2
Applicable
Gauge
mm 2
Recomm.
Gauge
AWG, kcmil
Applicable
Gauge
AWG, kcmil
Recomm.
Gauge
mm 2
Applicable
Gauge
mm 2
200 V Class
2A03P5
U, V, W
3.5 3.5 to 14 12 12 to 6 4 4 to 16 M4 2.1 to 2.3 X, Y, Z
R, S, T
2A0005
U, V, W
3.5 3.5 to 14 12 12 to 6 4 4 to 16 M4 2.1 to 2.3 X, Y, Z
R, S, T
2A0007
U, V, W
3.5 3.5 to 14 12 12 to 6 4 4 to 16 M4 2.1 to 2.3 X, Y, Z
R, S, T
2A0010
U, V, W
5.5 5 to 14 10 10 to 6 4 4 to 16 M4 2.1 to 2.3 X, Y, Z
R, S, T
2A0014
U, V, W
8 8 to 14 8 8 to 6 6 6 to 16 M4 2.1 to 2.3 X, Y, Z
R, S, T
2A0017
U, V, W
14 14 to 38 8 8 to 1 10 10 to 25 M6 3.6 to 4.0 X, Y, Z
R, S, T
2A0020
U, V, W
14 14 to 38 6 6 to 1 10 10 to 25 M6 3.6 to 4.0 X, Y, Z
R, S, T
2A0028
U, V, W
22 22 to 38 4 4 to 1 16 16 to 35 M6 3.6 to 4.0 X, Y, Z
R, S, T
2A0035
U, V, W
38 38 to 70 2 2 to 2/0 25 25 to 70 M8 5.4 to 6.0 X, Y, Z
R, S, T
3
TOEP_C710656_10B_1_0.book 130 ページ ２０１５年１月８日 木曜日 午後８時５５分