Operation
50
4. Harvesting
Moving in and out of the field
Use the
“
Forward
”
gear for
ascending and
“
Reverse
”
for
descending a steep slope, and drive
slowly. Otherwise, the machine may
fall over.
Set the range shift lever to “Low” and
main shift lever to “1” to cross
straightly the ridge.
Use the ramp boards if the ridge is
over 10cm high.
Harvesting by the ridge
Harvest manually within the areas 30cm from the ridge.
Pay attention to the crops not harvested near the ditch
and outside the track.
Order of operation
(1) Adjusting the swing separator pieces
The swing separator is used to separate grains from
chaff after threshing. Adjust the angle of chaff sieves of
the screen according to the crop variety and threshing
condition.
1- Remove the left rear cover of the threshing section.
2- Unfasten two bolts to take down the cover plate of
swing separator.
3- Turn the chaff sieve clearance adjust lever to change
the angle of chaff sieves.
“Open”
In case of heavy loss
“Standard” Standard
rice
“Close”
When the 2nd conveyer outlet is
blocked. Grain selection is poor.
[Reference]
Adjust the lever to “Standard” when delivery.
4- Replace the cover plate after adjustment.
Chaff sieve clearance
adjust lever
Close
Standard
Open
Cover plate
Bolt
Ridge
https://tractormanualz.com/yanmar/
