Operation
51
(2) Adjusting the screening air volume
Loosen the fixing bolt and move the damper up and
down to adjust the air volume. Remove the damper in
case of poor screening.
Close the damper in case of much back loss.
If light grain is still a loss from the back side of the
machine even when the damper is completely closed,
attach the winnower shutter (accessory) and decrease
the screening air volume.
(3) Adjusting the end plate of swing
separator up and down
Loosen the 4 fixing bolts at the end of swing separator
to move the adjustment plate up and down. Move the
plate upward in case of much scattering at the rear of
the machine, or downward in case of poor screening.
(4) Put the range shift lever to “Standard”,
“Low” or “High” according to the
condition of crop.
(5) Use the accelerator lever to adjust the
engine speed to the point that
tachometer hand falls in the “Green
Zone” of tachometer.
[Precaution]
Threshing may be incomplete and low in efficiency, and
the threshing section may be blocked if the engine speed
is below the rated level. The percentage of broken grain
may rise if the engine speed is too high.
(6) Put the threshing clutch lever and
header clutch lever to “ON”.
Fixing bolt
Damper
Fixing bolt
End adjustment plate
Range shift lever
Green zone
https://tractormanualz.com/yanmar/
