Yanmar 6LY3-STC Operation Manual Download Page 78

Page: 78 / 88

Engine Model

6LY3-STC

6LY3-UTC

Coolant Capacity (fresh)

Engine: 28 L (30 qt) Coolant recovery tank:

1.5 L (1.6 qt)

Engine Lubricating Oil Ca-

pacity

Rake Angle

rake angle 0 deg

Total (Note 4)

18.8 L (19.9 qt)

Effective (Note 5)

8.0 L (8.5 qt)

Starting System

Type

Electric

Starting Motor

DC 12V - 3kWDC 24V - 3.5kW (option)

AC Generator

12V - 80A24V-35A with DC-DC Converter

(option)

Turbocharger

Model

RHC7W (IHI made)

Type

Water cooled

Engine Dimension

Overall Length

1300.4 mm (51.2 in)

Overall Width

801.3 mm (31.5 in)

Overall Height

776.6 mm (30.6 in)

Engine Dry Mass (without marine gear)

640 kg (1410.96 lb)

Recommended Battery Capacity

12V-150AH or more24V-120AH or more

(option)

Notes:

1. Rating condition: ISO 8665. Temperature of fuel: 40°C (104°F) at fuel pump inlet.
2. 1 hp (metric horsepower) = 0.7355 kW
3. Fuel condition: Density at 15°C (59°F) = 0.860 g/cm

(53.67 lb ft

Fuel temperature at the inlet of the fuel injection pump.

4. The “Total Engine Lubricating Oil Capacity” includes oil in oil pan, channels, coolers and

filter.

5. The “Effective Engine Lubricating Oil Capacity” indicates the difference in maximum scale

of the dipstick and minimum scale.

SPECIFICATIONS

6LY3 LDC Operation Manual

Summary of Contents for 6LY3-STC
























































































Search results

Summary of Contents for 6LY3-STC

Reviews:

Yanmar 6LY3-STC, Operation Manual, Page: 78 / 88

Search results

Summary of Contents for 6LY3-STC

Reviews: