Yanmar 6LY3-STC Operation Manual Download Page 7

Page: 7 / 88

INTRODUCTION

Welcome to the world of Yanmar Marine!

Yanmar Marine offers engines, drive

systems and accessories for all types of

boats, from runabouts to sailboats, and from

cruisers to mega yachts. In marine light duty

commercial boating, the worldwide

reputation of Yanmar Marine is second to

none. We design our engines to respect

nature. This means quieter engines, with

minimal vibrations, cleaner than ever. All of

our engines designed after 1996 meet most

of the present and future emission

regulations, like BSO II, SAV, EPA II, IMO

and RCD.

To help you enjoy your Yanmar 6LY3 engine

for many years to come, please follow these

recommendations:

• Read and understand this Operation

Manual before you operate the machine to

ensure that you follow safe operating

practices and maintenance procedures.

• Keep this Operation Manual in a

convenient place for easy access.

• If this Operation Manual is lost or

damaged, order a new one from your

authorized Yanmar Marine dealer or

distributor.

• Make sure this manual is transferred to

subsequent owners. This manual should

be considered a permanent part of the

engine and remain with it.

• Constant efforts are made to improve the

quality and performance of Yanmar

products, so some details included in this

Operation Manual may differ slightly from

your engine. If you have any questions

about these differences, please contact

your authorized Yanmar Marine dealer or

distributor.

• The specifications and components

(instrument panel, fuel tank, etc.)

described in this manual may differ from

ones installed on your vessel. Please refer

to the manual provided by the

manufacturer of these components.

• Refer to the Yanmar Limited Warranty

Handbook for a complete warranty

description.

6LY3 LDC Operation Manual

Summary of Contents for 6LY3-STC
























































































Search results

Summary of Contents for 6LY3-STC

Reviews:

Yanmar 6LY3-STC, Operation Manual, Page: 7 / 88

Search results

Summary of Contents for 6LY3-STC

Reviews: