Yanmar 6LY3-STC Operation Manual Download Page 29

Page: 29 / 88

BEFORE YOU OPERATE

This section of the Operation Manual

describes the diesel fuel, engine oil, and

engine coolant specifications and how to

replenish them. It also describes the daily

engine checkout.

Before performing any operations within this

section, review the Safety section on

page 4.

DIESEL FUEL

DANGER! Diesel fuel is flammable and

explosive under certain conditions.

Refer to Fire and Explosion Hazard on

page 5.

Diesel Fuel Specifications

NOTICE: Only use diesel fuels

recommended by Yanmar Marine for the

best engine performance, to prevent engine

damage and to comply with EPA warranty

requirements. Only use clean diesel fuel.

Diesel fuel should comply with the following

specifications. The table lists several

worldwide specifications for diesel fuels.

DIESEL FUEL

SPECIFICATION

LOCATION

No. 2-D, No. 1-D, ASTM

D975

USA

EN590:96

European Union

ISO 8217 DMX

International

BS 2869-A1 or A2

United Kingdom

JIS K2204 Grade No. 2

Japan

6LY3 LDC Operation Manual

Summary of Contents for 6LY3-STC
























































































Search results

Summary of Contents for 6LY3-STC

Reviews:

Yanmar 6LY3-STC, Operation Manual, Page: 29 / 88

Search results

Summary of Contents for 6LY3-STC

Reviews: