Yamaha YZ 2018 Series, Owner'S Service Manual

Page: 393 / 402

KICK STARTER KIT (OPTIONAL PARTS)
10-12
Installing the kick shaft
1. Install:
• Stopper “1”
• Rachet wheel guide “2”
• Bolt (rachet wheel guide) “3”
2. Install:
• Kick idle gear “1”
• Washer “2”
• Circlip “3”
TIP
• Apply the engine oil on the kick idle gear inner
circumference.
• Install the kick idle gear with its depressed
side “a” toward you.
3. Install:
• Kick shaft assembly “1”
TIP
• Before installation, apply molybdenum disul-
fide grease to the contacting surfaces of the
kick shaft ratchet wheel guide “2” and the kick
shaft stopper “a”.
• Apply the engine oil on the kick shaft.
• Slide the kick shaft assembly into the crank-
case and make sure the kick shaft stopper “a”
fits into the kick shaft ratchet wheel guide.
4. Install:
• Torsion spring “1”
TIP
Turn the torsion spring clockwise and hook into
the proper hole “a” in the crankcase.
Bolt (rachet wheel guide)
12 N·m (1.2 kgf·m, 8.9 lb·ft)
LOCTITE®
T
R
.
.
3
3
1
LT
2
New