Yamaha YZ 2018 Series, Owner'S Service Manual, Page: 260 / 402

GENERATOR AND STARTER CLUTCH
5-63
2. Install:
• Washer
• Generator rotor nut “1”
3. Install:
• Starter idle gear shaft “1”
• Bearing “2”
• Starter idle gear 2 “3”
TIP
Apply the engine oil on the starter idle gear
shaft, bearing and idle gear inner circumfer-
ence.
4. Install:
• Dowel pin
• Crankcase cover gasket
• Left crankcase cover “1”
• Lead holder “2”
• Crankcase cover bolt
• Neutral switch lead “3”
TIP
• Pass the AC magneto lead “4” under the left
crankcase cover “a” as shown.
• Tighten the bolts in stage, using a crisscross
pattern.
5. Install:
• Washer “1”
• Damper assembly “2”
• Washer “3”
TIP
Apply the engine oil to the shaft and washers.
Generator rotor nut
65 N·m (6.5 kgf·m, 48 lb·ft)
Crankcase cover bolt
10 N·m (1.0 kgf·m, 7.4 lb·ft)
T
R
.
.
1
1
2
1
2
3
New
T
R
.
.
4
1
a
1
2
3
2
1
2
3