Yamaha TMAX XP500F 2015, Service Manual, Page: 13 / 478

FEATURES
1-4
EAS30618
MULTI-FUNCTION DISPLAY
WARNING
EWA17650
Be sure to stop the vehicle before making
any setting changes to the multi-function
meter unit. Changing settings while riding
can distract the operator and increase the
risk of an accident.
The multi-function display is equipped with the
following:
• a fuel meter
• a coolant temperature meter
• an odometer
• two tripmeters (which show the distance trav-
eled since they were last set to zero)
• a fuel reserve tripmeter (which shows the dis-
tance traveled when the remaining fuel in the
fuel tank reaches approximately 3.0 L (0.79 US
gal, 0.66 Imp.gal))
• a self-diagnosis device
• a clock
• an ambient temperature display
• a fuel consumption display (average and in-
stantaneous consumption functions)
• an oil change tripmeter (which shows the dis-
tance traveled since the last engine oil change)
• a V-belt replacement tripmeter (which shows
the distance traveled since the last V-belt re-
placement)
TIP
• Be sure to turn the vehicle power on before us-
ing the “SELECT” and “RESET” buttons.
• When the vehicle power is turned on, all of the
display segments of the multi-function display
will appear one after the other and then disap-
pear, in order to test the electrical circuits.
Clock
[To set the clock]
1. Push the “SELECT” and “RESET” buttons to-
gether for at least two seconds.
2. When the hour digits start flashing, push the
“RESET” button to set the hours.
3. Push the “SELECT” button, and the minute
digits will start flashing.
4. Push the “RESET” button to set the minutes.
5. Push the “SELECT” button and then release
it to start the clock.
1. “SELECT” button
2. Fuel meter
3. Fuel level warning indicator “ ”
4. Odometer
5. Coolant temperature warning indicator “ ”
6. Coolant temperature meter
7. “RESET” button
1. Tripmeter/fuel reserve tripmeter
2. Ambient temperature/average fuel
consumption/instantaneous fuel consumption
1. Clock
2
3
4
5
6
1 1 7
2
1
1
1. Clock
1