manualshive.com logo in svg

Yamaha O1V96, Owner'S Manual

The Yamaha O1V96 is a versatile and compact digital mixing console that offers professional-grade sound control. Enhance your audio production with ease by downloading the free Owner's manual from our website. Find all the essential information and guidelines to effortlessly maximize the potential of your Yamaha O1V96.

Share
Download
background image

 

(5)-1

 

  1/2

 

PRECAUTIONS

 

PLEASE READ CAREFULLY BEFORE PROCEEDING 

 

* Please keep this manual in a safe place for future reference.

 

 WARNING

 

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical 
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

 

• Only use the voltage specified as correct for the device. The required voltage is 

printed on the name plate of the device.

• Use only the specified power code.

• Do not place the power cord near heat sources such as heaters or radiators, and 

do not excessively bend or otherwise damage the cord, place heavy objects on 
it, or place it in a position where anyone could walk on, trip over, or roll anything 
over it.

• Do not open the device or attempt to disassemble the internal parts or modify 

them in any way. The device contains no user-serviceable parts. If it should 
appear to be malfunctioning, discontinue use immediately and have it inspected 
by qualified Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet conditions, 

or place containers on it containing liquids which might spill into any openings.

• Never insert or remove an electric plug with wet hands.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden 

loss of sound during use of the device, or if any unusual smells or smoke 
should appear to be caused by it, immediately turn off the power switch, 
disconnect the electric plug from the outlet, and have the device inspected by 
qualified Yamaha service personnel.

• If this device should be dropped or damaged,  immediately turn off the power 

switch, disconnect the electric plug from the outlet, and have the device 
inspected by qualified Yamaha service personnel.

 

 CAUTION

 

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage 
to the device or other property. These precautions include, but are not limited to, the following:

 

• Remove the electric plug from the outlet when the device is not to be used for 

extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold the 

plug itself and not the cord. Pulling by the cord can damage it.

• Before moving the device, remove all connected cables.

• Avoid setting all equalizer controls and faders to their maximum. Depending on 

the condition of the connected devices, doing so may cause feedback and may 
damage the speakers.

• Do not expose the device to excessive dust or vibrations, or extreme cold or heat 

(such as in direct sunlight, near a heater, or in a car during the day) to prevent 
the possibility of panel disfiguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall 

over.

• Do not block the vents. This device has ventilation holes at the top/front/rear/

sides to prevent the internal temperature from rising too high. In particular, do 
not place the device on its side or upside down, or place it in any poorly-
ventilated location, such as a bookcase or closet.

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile 

phone, or other electric devices. Otherwise, the device, TV, or radio may 
generate noise.

• Before connecting the device to other devices, turn off the power for all devices. 

Before turning the power on or off for all devices, set all volume levels to 
minimum.

• Be sure to connect to a properly grounded power source. A ground screw 

terminal is provided on the rear panel for safely grounding the device and 
preventing electrical shock.

Power supply/Power cord

Do not open

Water warning

If you notice any abnormality

Power supply/Power cord

Location

Connections

Summary of Contents for O1V96









































































































































































































































































































































Reviews:

No comments

Related manuals for O1V96

Yamaha MG124CX Owner'S Manual preview
MG124CX
Brand: Yamaha Pages: 24
First Degree Fitness Fluid Rower FDF User Manual preview
Fluid Rower FDF
Brand: First Degree Fitness Pages: 14
liebfeld 4742022040119 Instructions For Use & Safety Instructions preview
4742022040119
Brand: liebfeld Pages: 26
Marenius MM-4220 C Manual preview
MM-4220 C
Brand: Marenius Pages: 11
American Audio Q-SD Record User Manual And Reference Manual preview
Q-SD Record
Brand: American Audio Pages: 37
HAI Omni 33A00-1 Quick Reference Manual preview
Omni 33A00-1
Brand: HAI Pages: 1
Breville HANDY MIX DIGITAL BHM500XL Instruction Book preview
HANDY MIX DIGITAL BHM500XL
Brand: Breville Pages: 50
Wattson Classic Electronics FY-2 Fuzz Owner'S Manual preview
FY-2 Fuzz
Brand: Wattson Classic Electronics Pages: 12
Ninja Foodi CI090UK Quick Start Manual preview
Foodi CI090UK
Brand: Ninja Pages: 2
FONESTAR DMX-81 Instruction Manual preview
DMX-81
Brand: FONESTAR Pages: 16
Eldom R113 User Manual preview
R113
Brand: Eldom Pages: 16
CTP Systems FWD8000 Manual preview
FWD8000
Brand: CTP Systems Pages: 11
Dunlop univibe jhm3 User Manual preview
univibe jhm3
Brand: Dunlop Pages: 2
Gemini BPM-1000 Service Manual preview
BPM-1000
Brand: Gemini Pages: 13
Gemini PDM-1008 Service Manual preview
PDM-1008
Brand: Gemini Pages: 3
Gemini PDM-18 Quick Start Manual preview
PDM-18
Brand: Gemini Pages: 13
Universal Audio Starlight Echo Station User Manual preview
Starlight Echo Station
Brand: Universal Audio Pages: 3
Z Microsystems COMMAND CONSOLE 14 User Manual preview
COMMAND CONSOLE 14
Brand: Z Microsystems Pages: 32

Brands by name

Popular brands

Load more brands