Yamaha O1V96 Owner'S Manual Download Page 156

Page: 156 / 328

156

Chapter 13—Grouping Channels & Linking Parameters

01V96 Version 2—Owner’s Manual

3 Press the [SEL] button for a channel you wish to add to the EQ or Compressor

link.

The selected channel is marked with “

” and the channel is added to the link.

4 In the same way, press the [SEL] button for other channels you wish to add

to the link.

The EQ or compressor settings for the first channel added to the link are applied to all sub-
sequently-added channels.

5 After all desired channels are added to the link, edit the EQ or compressor

parameters for one of the linked channels.

The edits for the EQ or compressor parameters are applied to the rest of the linked channels.

Tip:

• If you add one channel from a pair to a link, the pair partner is automatically added to the

link.

• You can also select a channel on another layer by switching layers.

Example: Input Channels 1–4, 7, 8, 12 and 14 have been
added to EQ link b.

Summary of Contents for O1V96









































































































































































































































































































































Search results

Summary of Contents for O1V96

Reviews:

Related manuals for O1V96

Brands by name

Popular brands

Yamaha O1V96, Owner'S Manual

Search results

Summary of Contents for O1V96

Reviews:

Related manuals for O1V96

Brands by name

Popular brands