manualshive.com logo in svg

Yamaha O1V96, Owner'S Manual

The Yamaha O1V96 is a versatile and compact digital mixing console that offers professional-grade sound control. Enhance your audio production with ease by downloading the free Owner's manual from our website. Find all the essential information and guidelines to effortlessly maximize the potential of your Yamaha O1V96.

Share
Download
background image

MIDI Data Format

317

01V96 Version 2—Owner’s Manual

Appendix

2.8.3.21 Parameter request

(Sort Table)

When the 01V96 receives this data, it will transmit Sort Table Data.

2.8.3.22 Parameter change

(Key remote)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the same processing that is executed when the key speci-
fied by Address is pressed (released).

Transmission

If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.

2.8.3.23 Parameter change

(Remote Meter)

When transmission is enabled by receiving a Request of Remote meter, the 
specified meter information is transmitted every 50 msec for 10 seconds. When 
you want to transmit meter information continuously, a Request must be trans-
mitted continuously within every 10 seconds.

Reception

This is echoed if [Parameter change ECHO] is ON.

Transmission

When transmission has been enabled by a Request, the parameter specified by 
Address will be transmitted on the [Rx CH] channel at 50 msec intervals for a 
duration of 10 seconds.
Transmission will be disabled if the power is turned off and on again, or if the 
PORT setting is changed.
If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.

* Meter data uses the unmodified DECAY value of the DSP. The inter-

pretation of the data will depend on the parameter.

2.8.3.24 Parameter request

(Remote Meter)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, data of the specified address is transmitted on the [Rx 

CH] at intervals of 50 msec as a rule (although this may not be the case if the 
port is being used by other communication), for a period of 10 seconds.
If Address UL= 0x7F is received, transmission of all meter data will be halted 
immediately. (disable)

Transmission

If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.

2.8.3.25 Parameter change (Remote Time Counter)

When transmission is enabled by receiving a Request of Remote Time Counter, 
the Time Counter data is transmitted every 50 msec for 10 seconds. When you 
want to transmit Counter information continuously, a Request must be trans-
mitted within every 10 seconds.

Reception

This is echoed if [Parameter change ECHO] is ON.

Transmission

When transmission is enabled by receiving a Request, the Time Counter infor-
mation is transmitted on [RxCH] channel every 50 msec for 10 seconds.
Transmission will be disabled if the power is turned off and on again, or if the 
PORT setting is changed.
If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.

2.8.3.26 Parameter request (Remote Time Counter)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, the Time Counter information is transmitted on the [Rx 
CH] channel every 50 msec for 10 seconds.
When the second byte of Address is received on 0x7F, data transmission will be 
halted immediately. (disable)

Transmission

If [Parameter Change ECHO] is ON, this message is retransmitted without 
change.

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS

0011nnnn 3n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00001101 0D

01V96

ADDRESS

00010011 13

Library sort table

0000ffff 0f

Library type

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS

0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00001101 0D

01V96

ADDRESS

00100000 20

Key remote

0kkkkkkk kk

Key address H

0kkkkkkk kk

Key address M

0kkkkkkk kk

Key address L

DATA

0ppppppp pp

Release:0, Press:1

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS

0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00001101 0D

01V96

ADDRESS

00100001 21

Remote meter

0mmmmmmm mm

ADDRESS UL

0mmmmmmm mm

ADDRESS LU

0mmmmmmm mm

ADDRESS LL

DATA

0ddddddd dd

Data1 H

0ddddddd dd

Data1 L

:

:

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS

0011nnnn 3n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00001101 0D

01V96

ADDRESS

00100001 21

Remote meter

0mmmmmmm mm

ADDRESS UL

0mmmmmmm mm

ADDRESS LU

0mmmmmmm mm

ADDRESS LL

0ccccccc ch

Count H

0ccccccc cl

Count L

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS

0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00001101 0D

01V96

ADDRESS

00100010 22

Remote Time counter

0000tttt 0t

0:Time code, 1:Measure.Beat.Clock

0ddddddd dd

Hour   / Measure H

0ddddddd dd

Minute / Measure L

DATA

0ddddddd dd

Second / Beat

0ddddddd dd

Frame  / Clock

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS

0011nnnn 3n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00001101 0D

01V96

ADDRESS

00100010 22

Remote Time counter

0ddddddd dd

0:Transmission request, 
0x7F:Transmission stop request

EOX

11110111 F7

End of exclusive

Summary of Contents for O1V96









































































































































































































































































































































Reviews:

No comments

Related manuals for O1V96

Dash delish DCSM350 Instruction Manual preview
delish DCSM350
Brand: Dash Pages: 25
Varimixer V80 Spare Part And Operation Manual preview
V80
Brand: Varimixer Pages: 40
Catalinbread Dirty Little Secret User Manual preview
Dirty Little Secret
Brand: Catalinbread Pages: 8
TouellSkouarn Strakal Orsel Build Document preview
Strakal Orsel
Brand: TouellSkouarn Pages: 11
Sonuus Voluum Owner'S Manual preview
Voluum
Brand: Sonuus Pages: 2
Studio Technologies 214A User Manual preview
214A
Brand: Studio Technologies Pages: 27
Peavey XR s Operating Manual preview
XR s
Brand: Peavey Pages: 16
Clever Acoustics CRAM04 User Manual preview
CRAM04
Brand: Clever Acoustics Pages: 12
Peavey Architectural Acoustics MMA 800T User Manual preview
Architectural Acoustics MMA 800T
Brand: Peavey Pages: 12
Phonic POWERPOD 1082 User Manual preview
POWERPOD 1082
Brand: Phonic Pages: 24
Boss FV-300H Owner'S Manual preview
FV-300H
Brand: Boss Pages: 4
Peavey RSM 1662 User Manual preview
RSM 1662
Brand: Peavey Pages: 16
Dash Everyday Instruction Manual preview
Everyday
Brand: Dash Pages: 17
Beyerdynamic MA 206 Operating Instructions Manual preview
MA 206
Brand: Beyerdynamic Pages: 44
Laney CONCEPT 10 User Manual preview
CONCEPT 10
Brand: Laney Pages: 19
ALLEN & HEATH ZEDi-10 User Manual preview
ZEDi-10
Brand: ALLEN & HEATH Pages: 12
Russell Hobbs 24672 Manual preview
24672
Brand: Russell Hobbs Pages: 8
Fostex 250 Owner'S Manual preview
250
Brand: Fostex Pages: 28

Brands by name

Popular brands

Load more brands