manualshive.com logo in svg

Yamaha GRIZZLY 700 FI YFM7FGPX, Owner'S Manual

The Yamaha GRIZZLY 700 FI YFM7FGPX is a powerful and reliable all-terrain vehicle, perfect for outdoor enthusiasts. With its user-friendly features and cutting-edge technology, this machine delivers exceptional performance. To explore its full potential, make sure to download the free Owner's Manual from manualshive.com for step-by-step instructions and valuable information.

Share
Download
background image

7-20

7

WARNING

EWB01640

Never operate this ATV in fast flowing water or
in water deeper than that specified in your
Owner’s Manual. Remember that wet brakes
may have reduced stopping ability. Test your
brakes after leaving water. If necessary, apply
them several times to let friction dry out the lin-
ings. If the ATV is operated through deep or
fast flowing water, the tires may float, causing
loss of traction and loss of control, which
could lead to an accident.

Test your brakes after leaving the water. Do not
continue to ride your ATV without verifying that you
have regained proper braking ability.

CAUTION:

ECB00840

After riding your ATV in water, be sure to drain
the trapped water by removing the check hos-
es at the bottom of the air filter case. Also, re-
move the drain plugs from the front and rear
storage compartments and the V-belt case to
drain any water that may have accumulated.
Wash the ATV with fresh water if it has been
operated in salt water or muddy conditions.

U3B462E0.book  Page 20  Tuesday, March 20, 2007  11:46 AM

Summary of Contents for GRIZZLY 700 FI YFM7FGPX





































































































































































Reviews:

No comments

Related manuals for GRIZZLY 700 FI YFM7FGPX

Brands by name

Popular brands

Load more brands