manualshive.com logo in svg

Yamaha GRIZZLY 700 FI YFM7FGPX, Owner'S Manual

The Yamaha GRIZZLY 700 FI YFM7FGPX is a powerful and reliable all-terrain vehicle, perfect for outdoor enthusiasts. With its user-friendly features and cutting-edge technology, this machine delivers exceptional performance. To explore its full potential, make sure to download the free Owner's Manual from manualshive.com for step-by-step instructions and valuable information.

Share
Download
background image

8-53

8

EBU24951

Checking and lubricating the brake 
pedal 

The operation of the brake pedal should be
checked before each ride, and the pedal pivot
should be lubricated if necessary.

NOTE:

To access the brake pedal pivot, remove panel H.
(See page 8-8.)

EBU24962

Checking the wheel hub bearings 

The front and rear wheel hub bearings must be
checked at the intervals specified in the periodic
maintenance and lubrication chart. If there is play
in a wheel hub or if a wheel does not turn smoothly,
have a Yamaha dealer check the wheel hub bear-
ings.

EBU25021

Checking the stabilizer bushes 

The stabilizer bushes must be checked for cracks
or damage at the intervals specified in the periodic
maintenance and lubrication chart.
Have a Yamaha dealer replace the stabilizer bush-
es if necessary.

EBU25051

Lubricating the rear knuckle pivots 

The rear knuckle pivots must be lubricated at the
intervals specified in the periodic maintenance and
lubrication chart.
Lubricate the pivoting points using a grease gun.

Recommended lubricant:

Silicone grease

Recommended lubricant:

Lithium-soap-based grease

U3B462E0.book  Page 53  Tuesday, March 20, 2007  11:46 AM

Summary of Contents for GRIZZLY 700 FI YFM7FGPX





































































































































































Reviews:

No comments

Related manuals for GRIZZLY 700 FI YFM7FGPX

Brands by name

Popular brands

Load more brands