Yamaha GRIZZLY 700 FI YFM7FGPX Page 27 Owner'S Manual Download

Page: 27 / 164

4-4

The On-Command differential gear lock indicator
“

” in the On-Command four-wheel-drive indica-

tor also comes on when the On-Command differ-
ential gear lock switch is set to the “LOCK”
position.

NOTE:

●

Due to the synchronizing mechanism in the dif-
ferential gear case, the four-wheel-drive indica-
tor may not come on until the ATV starts moving.

●

When the On-Command differential gear lock
switch is set to “LOCK”, the indicator “

” will

flash until the differential gear is locked.

EBU17970

Park indicator light “

”

This indicator light comes on when the transmis-
sion is in the park position.

EBU17980

High-range indicator light “

”

This indicator light comes on when the transmis-
sion is in the high-range position.

EBU17990

Low-range indicator light “

”

This indicator light comes on when the transmis-
sion is in the low-range position.

EBU18001

On-Command differential gear lock indicator
light “DIFF. LOCK”

This indicator light and the On-Command differen-
tial gear lock indicator in the display come on when
the On-Command differential gear lock switch is
set to the “LOCK” position.

NOTE:

When the switch is set to “LOCK”, the On-Com-
mand differential gear lock indicator light will flash
until the differential gear is locked.

U3B462E0.book Page 4 Tuesday, March 20, 2007 11:46 AM

Summary of Contents for GRIZZLY 700 FI YFM7FGPX





































































































































































Search results

Summary of Contents for GRIZZLY 700 FI YFM7FGPX

Reviews:

Related manuals for GRIZZLY 700 FI YFM7FGPX

Brands by name

Popular brands

Yamaha GRIZZLY 700 FI YFM7FGPX, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 700 FI YFM7FGPX

Reviews:

Related manuals for GRIZZLY 700 FI YFM7FGPX

Brands by name

Popular brands