Yamaha GRIZZLY 700 FI YFM7FGPX Owner'S Manual Download | Manualshive

Page: 34 / 164

background image

4-11

4

To lock the differential gear in four-wheel drive,
make sure the On-Command four-wheel-drive
switch is pushed in to the “4WD” position.

Stop the ATV, move the differential gear lock lever
to position (a), and then push the differential gear
lock switch in to the “LOCK” position. When the dif-
ferential gear is locked, the differential gear lock in-
dicator “DIFF. LOCK” will come on along with the
indicator “

” in the multifunction display.

To release the differential gear lock, stop the ATV
and push the switch to the “4WD” position.

WARNING

EWB00130

Always stop the ATV before changing from
four-wheel drive to four-wheel-drive differen-
tial gear lock or vice-versa.
The ATV handles differently in four-wheel drive
than in differential gear lock in some circum-
stances. Changing from four-wheel drive to dif-
ferential gear lock or vice-versa while moving
may cause the ATV to handle differently unex-

1. Differential gear lock lever
2. On-Command four-wheel-drive switch “2WD”/“4WD”

1. On-Command differential gear lock switch “4WD”/“LOCK”

U3B462E0.book Page 11 Tuesday, March 20, 2007 11:46 AM

«
...
32
33
34
35
36
...
»

Summary of Contents for GRIZZLY 700 FI YFM7FGPX





































































































































































Reviews:

No comments

Related manuals for GRIZZLY 700 FI YFM7FGPX

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands