Yamaha F225F, Service Manual

Page: 506 / 576

9-27
BRKT
Bracket unit
Removing the clamp bracket
1. Remove the PTT unit. See “Removing
the PTT unit” (9-32).
2. Remove the anode
a
.
3. Remove the ground leads
b
and
c
.
4. Remove the self-locking nut
d
and
through tube
e
, and then disassemble
the clamp brackets
f
and
g
.
5. Remove the trim sensor
h
.
6. Remove the spring
i
, hook
j
, and pins
k
.
7. Remove the tilt stop levers
l
and
m
,
distance collar assembly
n
, collar
o
,
and bushings
p
.
Checking the clamp bracket anode
1. Check the anode. Replace if eroded.
Clean if there is grease, oil, or scales.
NOTICE: Do not apply grease, oil, or
paint to the anodes.
Installing the clamp bracket
1. Assemble the distance collar assembly.
b
c
d
g
a
f
e
h
Distance
a
:
30.3–30.4 mm (1.19–1.20 in)
k
k
i
j
l
m
n
o
p
p
p
a