Manual Ozone Generating System
SMOevo
PLUS
Operation
Manual_SMOevoPLUS_eng_01.2019.doc
page 105 of 179
8.14 Production Settings (Screen 03.00.04) Dose Control with
Dose Trim Function
Production Settings screen with control mode Dose Control with Dose Trim Function.
Production Mode
Ozone Mass
Direct specification of the required ozone mass, no internal
calculation depending on the process water flow. In this operating
mode it is not possible to correct the dose using the trim function
(if available). See section Production settings (screen 03.00.03)
Required Ozone Mass.
Required Ozone Mass (Production Mode: Ozone Mass*)
Die benötigte Ozonmenge wird wie folgt angezeigt:
SP
Setpoint in g/h, according to the design data of the system
PV
Actual value in g/h, showing the actual Process Value.
* See Production Mode (Constant Setpoint)