•
Available Programmers
: Check Water, Gas, Electric, and/or RGS under the Available
Programmers group for the ability to program water, gas, electric, and/or RGS
SmartPoints within FlexPro.
•
Show Previous Reading
(if available): Displays the previous reading when entering a
manual reading.
•
Hide Supervisor Button
: Hides the
Supervisor
button within the Configuration menu of
FlexPro. With this button hidden, HHD users will NOT be able to change the pre-defined
configuration settings while out in the field.
•
Hide Buttons
: Check to hide the appropriate menu option from being displayed within
the Route screen of FlexPro.
•
AMR Read Time (seconds)
: Allows the user to select the duration of a continuous WB/
DB read cycle. Read Time options are 30, 60, 90, and 120 seconds.
•
FlexPro Reading File Export
: Allows the user to select how readings are exported from
FlexPro back to AutoRead. Users have the option to export either ALL readings received
from SmartPoints or only the LAST reading received. Setting this option to ALL could
potentially create a much larger export file.
AR550X Programmer Subtab
The
Programmer
subtab has parameters which are universal across all industries (Water,
Gas and Electric), but also has parameters which are specific to a single industry. The
universal parameters are located at the top of the tab in AutoRead, while the specific
parameters are located in the tabs below that information (Gas, Water, Electric, and RGS).
•
Allow Adhoc Programming
: Allows programming to be done outside of the Route
screen in FlexPro. If not checked, the
Programming
button is disabled on the main
screen of FlexPro.
•
Show Programming Verification
: Displays a Data Verification screen immediately
before programming a SmartPoint. This is useful to ensure that the proper programming
3 Polling Devices | 33
