![background image](http://html1.mh-extra.com/html/xerox/workcentre-c2424-dx/workcentre-c2424-dx_service-manual_4165430152.webp)
3-60
WorkCentre C2424 Service Manual
P4T
Process motor stalled while the system transfixed the print.
P4V
Process motor stalled while the system performed a print drum maintenance cycle.
P4W
Process motor stalled while the system imaged the drum.
P4X
Process motor stalled while the print exited the system.
1.
Ensure the media is supported.
2.
Verify that the Process Drive Gearbox is correctly aligned and homed.
3.
Run the Process Motor test.
4.
Replace the process motor if necessary.
5.
Run the Transfix Fast and Slow tests.
6.
Replace the transfix camshaft and load arms if necessary.
7.
Run the Tilt Drive test, replace if necessary.
8.
Replace the process drive gearbox assembly.
T2A
The exit door open flag unexpectedly tripped while the system was performing an
abnormal shutdown.
T2B
The exit door open flag unexpectedly tripped while the system was performing a
normal shutdown.
T2C
The exit door open flag unexpectedly tripped while the system was performing a
mechanical recovery.
T2D
The exit door open flag unexpectedly tripped while the system was warming up.
T2E
The exit door open flag unexpectedly tripped while the system was ready.
T2x (continued)
T2F
The exit door open flag unexpectedly tripped while the system was in a fault state.
T2G
The exit door open flag unexpectedly tripped while the system was performing an
automatic drum maintenance cycle.
T2H
The exit door open flag unexpectedly tripped while the system was performing a
printhead maintenance cycle.
T2J
The exit door open flag unexpectedly tripped while the system was performing a
printhead purge cycle.
T2K
The exit door open flag unexpectedly tripped while the system was performing a
transfix oiling cycle.
T2L
The exit door open flag unexpectedly tripped while the system was in Standby
mode.
T2M
The exit door open flag unexpectedly tripped when the system picked from Tray 2.
T2N
The exit door open flag unexpectedly tripped when the system picked from Tray 3.
T2P
The exit door open flag unexpectedly tripped when the system picked from Tray 4.
Jam Code Troubleshooting Procedures
(Continued)
Summary of Contents for WorkCentre C2424/DX
