![background image](http://html1.mh-extra.com/html/xerox/workcentre-c2424-dx/workcentre-c2424-dx_service-manual_4165430127.webp)
Error Messages and Codes
3-35
33,0XX.xx Errors - Tray Manager Device Faults
33,001.42:
Tray 1 width value too low.
33,002.43:
Tray 1 width value too high.
34,0XX.xx Errors - Printhead NVRAM Faults
34,001.43:
An error occurred while attempting read/write access to the printhead
calibration partition in NVRAM. The printhead cable may be unplugged.
34,002.44:
An error occurred while attempting read/write access to the printhead ink
data partition in NVRAM.
34,003.45:
An error occurred while attempting read/write access to the printhead
data partition in NVRAM.
34,004.46:
An error occurred while accessing the printhead NVRAM hardware for
the purpose of initialization. The printhead cable may be unplugged.
Troubleshooting Procedure
Step
Questions and Actions
Yes
No
1
1.
Check the wiring and connectors from the
front door to the I/O board.
2.
Are the wires connected properly?
Go to Step 2.
Replace the
wiring harness.
2
1.
Run the Test Tray 1 Width Sensor test.
2.
Did the test pass?
Replace the I/O
board.
Replace the
front door.
Troubleshooting Procedure
Step
Questions and Actions
Yes
No
1
1.
Check and reseat all wiring to the printhead.
2.
Did this correct the problem?
Complete.
Replace in the
following order:
■
Printhead
■
Electronics
Module.
Summary of Contents for WorkCentre C2424/DX
