![background image](http://html2.mh-extra.com/html/xerox/workcentre-490cx/workcentre-490cx_online-users-manual_4252074099.webp)
100
BOOK TOC
CHAPTER TOC
SEARCH
PREVIOUS PAGE
NEXT PAGE
MANUAL FAXING
Inserting a Pause
With some private telephone systems, you must dial an access code (9 for
example) and listen for a second dial tone before dialing an outside number.
In such cases, you must insert a pause in the telephone number. You can
insert a pause in the telephone number when you are setting up a Speed Dial
number, or when you dial a number without lifting the handset.
To insert a pause, press the Redial/Pause button at the appropriate place
while entering the telephone number. A “P” will appear in the display at the
corresponding location.
When you dial a number, the dialing process pauses for about 3 seconds at
the point where you inserted the pause. If you require a longer pause time,
press the Redial/Pause button twice.
Redial/Pause
Redial/Pause redials the last number, the last ten numbers, or adds a pause
when storing a number in Phonebook memory.
To redial the last number called, press the Redial/Pause
button. If a
document is loaded in the document tray, the machine automatically begins
to send.
Redial Memory
To search through Redial memory:
1. Press and hold the Redial/Pause
button for 2 seconds.
The Redial memory in your machine retains the last 10 numbers called. If
you have dialed the same number multiple times, the machine does not
count the duplicates.