25
BOOK TOC
CHAPTER TOC
SEARCH
PREVIOUS PAGE
NEXT PAGE
SET UP YOUR MACHINE
For transparencies, be sure to use transparency stock approved for use
with inkjet printers. Refer to the packaging for the transparency stock to
determine the print side. Hold the transparencies by the edges and avoid
touching the print side. Be careful not to scratch or leave fingerprints on
the print side. Fan the stack of transparencies to prevent feeding failures.
3. Load the print material in the Automatic Paper Feeder. Ensure that the
right edge of the media is in contact with the right side of the Automatic
Paper Feeder. Do not exceed the rated capacity. Do not mix different
types of print media. Refer to the following instructions for loading each
type of print material.
a)
Load paper or transparencies with the print side facing you.
b)
Load letterhead paper with the design side face-up. The top edge of
the sheet with the logo should enter the printer first.
