![background image](http://html2.mh-extra.com/html/xerox/workcentre-490cx/workcentre-490cx_online-users-manual_4252074242.webp)
245
BOOK TOC
CHAPTER TOC
SEARCH
PREVIOUS PAGE
NEXT PAGE
TELEPHONE CONNECTIVITY GUIDELINES
To use your WorkCentre as a stand-alone fax machine without a PC
Plug one end of a telephone cable into the WorkCentre’s Line connector, and
the other end into the wall telephone line outlet.
The WorkCentre is set up at the factory to automatically answer an incoming
call. If you do not want the WorkCentre to answer the phone, set the Receive
mode to TEL. At the control panel, press the Receive Mode button (until
TEL displays).
To provide more time before the WorkCentre automatically answers the call,
leave the Receive mode on Fax, but increase the ANSWER ON RINGS
setting. At the control panel, press the following keys:
MENU, 0, 1, Start, UP ARROW 7 TIMES (until ANSWER ON RINGS
displays)
Next, enter the number that represents the number of rings that you want to
occur before the WorkCentre answers the call, and press the Clear/Stop
button.
You can connect an extension telephone to EXT on the WorkCentre.
From the LINE connector
Wall outlet