![background image](http://html2.mh-extra.com/html/xerox/workcentre-490cx/workcentre-490cx_online-users-manual_4252074218.webp)
221
BOOK TOC
CHAPTER TOC
SEARCH
PREVIOUS PAGE
NEXT PAGE
MANAGING THE INK CARTRIDGES
The letter A located on the right end of the lower line in the display
corresponds to alignment test pattern A. The range of numbers
bracketed in the center of the display indicates the range of valid pattern
selection choices. The flashing number on the left side of the display
indicates the line from print pattern A that is currently selected as optimal.
4. Using the Number Keypad, enter the number of the line which appears
the straightest from pattern A.
5. Press the Up
and Down
button to confirm your selection. The
LCD panel updates and the setup screen for the Alignment B test pattern
is displayed.
6. Using the Number Keypad, enter the number of the line which appears
the straightest from pattern B.
7. Press the Up
and Down
button to confirm your selection. The
LCD panel updates and the setup screen for the Alignment C test pattern
is displayed.
8. Using the Number Keypad, enter the number of the line which appears
the straightest from pattern C.
9. Press the Up
and
Down
button to confirm your selection. The
LCD panel updates and the setup screen for the Alignment D test pattern
is displayed.
10. Using the Number Keypad, enter the number of the line which appears
the straightest from Alignment pattern D.
11. Press the Up
and Down
button to confirm your selection. The
LCD panel updates and the setup screen for the Alignment E test pattern
is displayed.
12. Using the Number Keypad, enter the number of the line which appears
the straightest from Alignment pattern E.