Xerox WorkCentre 4250C User Manual Download Page 64

Page: 64 / 230

Copy

Xerox WorkCentre 4250/4260 User Guide

Transparency jobs will be delivered single-sided, and collated with no finishing. The
quantity can only be set to 1 for this feature.

Select

Blank

to have the system insert a blank page between each transparency,

or select

Printed

to insert a printed page between each transparency. Then choose

the appropriate transparency and separator stock.

Transparency Supply:

Select this button to specify the tray from which the

machine needs to use the transparency stock.

Separator Supply:

Select this button to specify the tray from which the machine

needs to use the separator stock.

Page Layout

This feature is used to copy two or more documents, in a reduced size, onto one
sheet of paper. It is ideal for creating handouts, storyboards or documents used for
archival purposes.

Summary of Contents for WorkCentre 4250C







































































































































































































































Search results

Summary of Contents for WorkCentre 4250C

Reviews:

Related manuals for WorkCentre 4250C

Brands by name

Popular brands

Xerox WorkCentre 4250C, User Manual

Search results

Summary of Contents for WorkCentre 4250C

Reviews:

Related manuals for WorkCentre 4250C

Brands by name

Popular brands