Xerox WorkCentre 4250C, User Manual

Page: 194 / 230

11 Setups
186 Xerox WorkCentre 4250/4260 User Guide
Print Job Control enables charging for print jobs. Print jobs sent when it is enabled
will be held in the job queue and can be manually released when credits are
available at the foreign device.
The services available at the machine can be set using Inhibit Services. Choosing
Copy Only will require credits at the foreign device for copying but allow access to
other services. Inhibiting
All Services will require credits to access any service that
requires paper.
This option is only available if a Foreign Interface Device Kit is installed on the
machine.
NOTE: The Foreign Device Interface feature is mutually exclusive from any other
accounting feature. If the Foreign Device Interface feature is used, you cannot
enable XSA or Network Accounting.