Xerox WorkCentre 4250C User Manual Download Page 221

Page: 221 / 230

Troubleshooting

Xerox WorkCentre 4250/4260 User Guide

213

Document Feeder Area Jams

Lift the Main Document
Feeder handle to open the
document feeder cover.

Lift to open the internal
document feeder cover.

Remove any jammed
paper.

Close the document
feeder covers.

Re-order the documents
as at the start of the job
and reload.
The documents will be recycled automatically to recover the job integrity.

Document Glass Area Duplex Jams

Open the document
feeder.

Pull down the Lower
Jam Clearance Cover
handle to open the
Lower Jam Clearance
Cover.

Remove any jammed
paper.

Close the Lower Jam
Clearance Cover and the document feeder.

Re-order the documents as at the start of the job and reload. The documents
will be recycled automatically to recover the job integrity.

NOTE:

This area is only used when copying two sided documents.

Main Document Feeder
handle

Internal Feeder
Cover

Lower Jam
Clearance Cover
handle

Summary of Contents for WorkCentre 4250C







































































































































































































































Search results

Summary of Contents for WorkCentre 4250C

Reviews:

Related manuals for WorkCentre 4250C

Brands by name

Popular brands

Xerox WorkCentre 4250C, User Manual

Search results

Summary of Contents for WorkCentre 4250C

Reviews:

Related manuals for WorkCentre 4250C

Brands by name

Popular brands