![background image](http://html.mh-extra.com/html/xerox/workcentre-3025bi/workcentre-3025bi_user-manual_884169049.webp)
Network Installation: TCP/IP
Xerox® WorkCentre® 3025
User Guide
39
3.
Select
Properties
.
4.
If prompted, enter the Administrator User Name (
admin
)
and Password
(
1111
), and select
Login
.
Select
Properties.
5.
In the
Network Settings
link select
TCP/IPv4
from the directory tree. The
TCP/IPv4
page displays.
6.
In the
Assign
IPv4
Address
menu, select
Automatically
or
Manually
.
7.
If
Manually
is selected, in the
TCP/IP Settings
area enter details of the machine in the following
fields:
a.
IPv4 Address
b.
Subnet Mask
c.
Gateway Address
If
Automatically
is selected, select
BOOTP
or
DHCP
.
Notes:
•
If
BOOTP
or
DHCP
mode is selected, you cannot change the
IP
Address
,
Network
Mask
,
or
Router/Gateway
Address
. Select
Auto
IP
if required.
•
New settings will not be applied until the machine is rebooted. Changing the machine’s
TCP/IP
setting may cause you to lose your connection to the machine.
8.
In the
Domain Name
area:
a.
Enter a domain name in the
Domain Name
field.
b.
Enter an IP address in the
Primary DNS Server
and
Secondary DNS Server
fields.
c.
Select the
Enable
box to enable
Dynamic
DNS
Registration
if required.
Note:
If your DNS Server does not support dynamic updates there is no need to select
Enabled
.
9.
In the
WINS
area select the box to enable
WINS
and enter details in the following fields:
a.
Primary WINS Server
b.
Secondary WINS Server
10. Select
Apply
to save the changes.
11. Select
OK
when the acknowledgement message displays.
IPv6
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2.
Press
Enter
.
3.
Select
Properties
.
4.
If prompted, enter the Administrator User Name (
admin
)
and Password
(
1111
), and select
Login
.
Select
Properties.
5.
In the
Network Settings
link, select
TCP/IPv6
from the directory tree.
6.
Select the
Enable
check box to enable IPv6 protocol and select
OK
.
7.
To set a manual address, select
Enable Manual Address
and enter the address and prefix in the
Address/Prefix
area. Information in the
Assigned IPv6 Addresses
box is automatically
populated.
8.
The machine performs auto-address DHCPv6 configuration every time it powers up. This is used
for neighbor discovery and address resolution on the local IPv6 subnet. However, you can choose
Summary of Contents for WorkCentre 3025BI
