Xerox VersaLink B400, User Manual

Page: 153 / 188

8. Close the rear door.
T R O U B L ES H O O T I N G PA P E R J A M S
Multiple Sheets Pulled Together
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
The paper tray is too full. Remove some of the paper. Do not load paper above the maximum
fill line.
The edges of the paper are not even. Remove the paper, align the edges, and then reload the paper.
The paper is moist from humidity. Remove the paper from the paper tray. Load new, dry paper into the
tray.
Too much static electricity is present. Load a new ream of paper.
Using unsupported paper. Use only Xerox ® -approved paper. For details, refer to Supported Paper .
Humidity is too high for coated paper.
• Feed paper one sheet at a time.
• Try loading paper in the Bypass tray.
The feed rollers are dirty. With a clean, lint-free cloth moistened with water, wipe the feed
rollers until they are clean. For details, refer to
Cleaning the Printer .
Tray is loaded with mixed paper. Load the tray with only one type and size of paper.
Paper Misfeeds
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
The paper is not correctly positioned in the tray. Remove the misfed paper and reposition it properly in
the tray.
Adjust the paper guides in the tray to match the size of
the paper.
The paper tray is too full. Remove some of the paper. Do not load paper past the
fill line.
Xerox
®
VersaLink
®
B400 Printer User Guide
153
Troubleshooting