Xerox VersaLink B400, User Manual

Page: 126 / 188

Adjustments and Maintenance Procedures
A D J U S T I N G PA P E R R E G I S T R AT I O N
Use Adjust Paper Registration to adjust the placement of the printed image on the page. The adjustment allows
you to place the top, bottom, left, and right margins exactly where you want. You can specify the image position on
both the front and back sides of the paper, for each installed paper tray.
Verifying Paper Registration
1. At the printer control panel, press the H Hoom mee button.
2. Log in as administrator. For details, refer to the System Administrator Guide at www.xerox.com/support/
VLB400docs .
3. Touch D Deevviiccee >> SSuuppppoorrtt >> IIm maaggee PPoossiittiioonn.
4. Select the source paper tray for the registration print.
a. Touch PPaappeerr SSuuppppllyy.
b. Touch the desired tray.
5. If your printer has automatic 2-sided printing, select the sides that you want to optimize.
• To select a sample registration page for adjusting side 1, touch A Addjjuusstteedd SSiiddee, then touch SSiiddee 11.
• To select a sample registration page for adjusting both sides, touch A Addjjuusstteedd SSiiddee, then touch SSiiddee 2 2.
6. Specify the consecutive number of sample pages to print.
a. Touch PPrriinntt SSeettttiinnggss.
b. To increase or decrease the number of sample pages, for Quantity, touch Plus (++) or Minus (--), then touch
O OKK.
7. To print the sample pages, touch PPrriinntt SSaam mppllee.
8. When printing is completed, touch C Clloossee.
9. On the sample pages, for Side 1, use a ruler to measure the distance of the printed image from the top,
bottom, left, and right edges.
Note: For identification, a single dot is printed on Side 1, and two dots are printed on Side 2.
126
Xerox
®
VersaLink
®
B400 Printer User Guide
Maintenance