Xerox VersaLink B400, User Manual

Page: 139 / 188

D O C U M E N T P R I N T S F R OM W R O N G T R AY
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
Application and print driver have conflicting tray
selections.
1 Check the tray selected in the print driver.
2 Access the page setup or printer settings of the
application from which you are printing.
3 Set the paper source to match the tray selected in
the print driver or set the paper source to
A
Auuttoom maattiiccaallllyy SSeelleecctt.
4 Check that you have the latest print driver installed.
For details, go to www.xerox.com/support/
VLB400support .
Note: To have the print driver select the tray, set
the tray used as the paper source to A
Auuttoo
SSeelleeccttiioonn EEnnaabblleedd.
A U TO M AT I C 2 - S I D E D P R I N T I N G P R O B L E M S
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
Unsupported or incorrect paper. Ensure that you are using a supported paper size and weight for 2-
sided printing. Envelopes, cardstock, and labels cannot be used for
2-sided printing. For details, refer to
Supported Paper Types and
Weights for Automatic 2-Sided Printing .
Your printer model is not configured
with automatic 2-sided printing. Ensure that your printer supports automatic 2-sided printing. For
details, refer to
Printer Configurations and Options .
Incorrect setting. In the print driver Printing Options tab, select 22--SSiiddeedd PPrriinntt.
P R I N T E R I S M A K I N G U N U S UA L N O I S E S
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
There is an obstruction or debris inside the printer. Power off the printer, then remove the obstruction
or debris. If you cannot remove the obstruction,
contact your Xerox representative.
Xerox
®
VersaLink
®
B400 Printer User Guide
139
Troubleshooting