Xerox VersaLink B400, User Manual

Page: 140 / 188

PA P E R T R AY W I L L N O T C LO S E
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
The paper tray does not fully close.
• If the tray is extended for legal-size paper, the tray
protrudes when it is inserted into the printer. For
more information, refer to
Configuring Trays 1–4
for the Paper Length .
• Some debris or an object is blocking the tray.
• The tray is blocked by the table or shelf on which it
is located.
• If the paper lift plate at the back of the tray is not
locked down, replace the tray.
C O N D E N S AT I O N H A S FO R M E D I N S I D E T H E P R I N T E R
Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is located in a
warm room. Condensation can form in a printer after it has been sitting in a cold room that is heated quickly.
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
The printer has been sitting in a cold room. Allow the printer to operate for several hours at room
temperature.
The relative humidity of the room is too high.
• Reduce the humidity in the room.
• Move the printer to a location where the
temperature and relative humidity are within the
operating specifications.
140
Xerox
®
VersaLink
®
B400 Printer User Guide
Troubleshooting