Xerox VersaLink B400, User Manual

Page: 125 / 188

Cleaning the Printer
C L E A N I N G T H E E X T E R I O R
Clean the exterior of the printer once a month.
• Wipe the paper tray, output tray, control panel, and other parts with a damp, soft cloth.
• After cleaning, wipe with a dry, soft cloth.
• For stubborn stains, apply a small amount of mild detergent to the cloth and gently wipe the stain off.
C Caauuttiioonn::
Do not spray detergent directly on the printer. Liquid detergent could enter the printer through
a gap and cause problems. Never use cleaning agents other than water or mild detergent.
C L E A N I N G T H E I N T E R I O R
Clean the interior of the printer regularly to prevent stains inside the printer that can deteriorate print quality. Clean
the printer interior whenever you replace a drum cartridge.
After clearing paper jams or replacing a toner cartridge, inspect inside the printer before closing the printer covers
and doors.
• Remove any remaining pieces of paper or debris. For details, refer to Clearing Paper Jams .
• Remove any dust or stains with a clean, dry, lint-free cloth.
W Waarrnniinngg::
Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If a
sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Power off the
printer immediately and wait 40 minutes for the fuser to cool. Try to remove the paper jam after the
printer has cooled.
Xerox
®
VersaLink
®
B400 Printer User Guide
125
Maintenance