Xerox Phaser 6360 Service Manual Download Page 393

Page: 393 / 564

Phaser 6300/6350/6360 Color Laser Printer Service Manual

8-117

Service Parts Disassembly

Feeder Chute (PL12.2.7)

Remove the tray.

Push inward on the concaved sections at the left and the right sides and
swing the Feeder Chute downward.

Release the retainer at one end of the Feeder Chute to release the boss
from the Feeder Assembly.

Pull the Feeder Chute out, and then down to remove it from the frame.

Summary of Contents for Phaser 6360





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Phaser 6360

Reviews:

Related manuals for Phaser 6360

Brands by name

Popular brands

Xerox Phaser 6360, Service Manual

Search results

Summary of Contents for Phaser 6360

Reviews:

Related manuals for Phaser 6360

Brands by name

Popular brands