manualshive.com logo in svg

Xerox Phaser 6360, Service Manual, Page: 395 / 564

Share
Download
Xerox Phaser 6360 Service Manual Download Page 395

Phaser 6300/6350/6360 Color Laser Printer Service Manual

8-119

Service Parts Disassembly

Right Feeder Assemblies (PL12.2.4)

Caution

Move the sensor flags upwards before attempting to remove the feeders.

1.

Remove the Front Covers (page 8-113).

2.

Remove the Right Cover (page 8-115).

3.

Remove the Feeder Chute (page 8-117).

4.

Remove the Tray Rear Cover (page 8-23).

Note

Perform Step 5 only when removing the upper Right Feeder Assembly.

5.

Remove the Drive Assembly (page 8-123).

6.

Remove the Paper Size Switch connector (P/J821).

7.

Remove 6 screws (self-tapping, plastic 8 mm) that secure the Right 
Feeder.

8.

Tilt the Right Feeder Assembly and remove it from the front.

Note

Replace the Upper Right Feeder before replacing the Drive Motor.

s6360-255

Summary of Contents for Phaser 6360





















































































































































































































































































































































































































































































































































































Reviews:

No comments