Xerox Phaser 6360 Service Manual Download Page 291

Page: 291 / 564

Phaser 6300/6350/6360 Color Laser Printer Service Manual

8-15

Service Parts Disassembly

Left Side Cover (PL1.1.30)

Remove the Top Main Cover (page 8-11).

Remove the screw (plastic, 10 mm)

that fixes the Left Side Cover.

Slide the cover rearward to release the hook on the front that also holds
the Left Side Cover and remove.

s6360-136

Hook

Summary of Contents for Phaser 6360





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Phaser 6360

Reviews:

Related manuals for Phaser 6360

Brands by name

Popular brands

Xerox Phaser 6360, Service Manual

Search results

Summary of Contents for Phaser 6360

Reviews:

Related manuals for Phaser 6360

Brands by name

Popular brands