Xerox Phaser 6360 Service Manual Download Page 300

Page: 300 / 564

8-24

Phaser 6300/6350/6360 Color Laser Printer Service Manual

Service Parts Disassembly

Printer Chassis

Removal of the printer chassis is required to service the following
components:

■

Tray 2 Paper Size Switch

■

Option Feeder Harness

■

Tray 2 Paper Pick Assembly

■

Tray 2 No Paper Sensor and Actuator

Caution

Two people are required to separate the chassis from the Tray 2 Feeder.

Remove Tray 2.

Remove the Top Main Cover (page 8-11).

Remove the Right Side Cover (page 8-14).

Remove the Left Side Cover (page 8-15).

Remove the Rear Cover (page 8-17).

Remove the Feeder Chute (page 8-22).

Remove the Front Feeder Frame Cover (page 8-20)

Perform steps 1 and 2 of the I/P Board removal procedure (page 8-99).

Remove the LVPS Fan Duct.

10.

Remove the HVPS (page 8-111).

11.

Remove the Temperature/Humidity Sensor Bracket (page 8-110).

12.

Unplug connectors (P/J161, 162, 163, 164, and 165) from the LVPS. See
the locator diagram on page 10-6.

Summary of Contents for Phaser 6360





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Phaser 6360

Reviews:

Related manuals for Phaser 6360

Brands by name

Popular brands

Xerox Phaser 6360, Service Manual

Search results

Summary of Contents for Phaser 6360

Reviews:

Related manuals for Phaser 6360

Brands by name

Popular brands