Xerox Phaser 6360, Service Manual, Page: 36 / 564

1-12 Phaser 6300/6350/6360 Color Laser Printer Service Manual
General Information
Life ratings are based on A-size sheets at 5% coverage. Imaging Unit life
ratings are based on average 5 page job length.
Specifications
Memory Specifications
Electrical Specifications
Toner Cartridges Print Life
Black-Capacity
Color Capacity
Metered (PagePack) Capacity (all colors) 9000 standard, 18,000 high capacity
5000 standard, 12,000 high capacity
18,000 high capacity
Maintenance Items
Imaging Unit 35,000
Fuser 100,000
Transfer Roller and Waste Box 35,000
Feed Roller Kit up to 100,000
Long-Life Maintenance Kit up to 300,000
Characteristic Specification
Minimum RAM 256 MB
Maximum RAM 1 GB
Supported RAM SODIMM 200-pin module of 256 or 512 MB. All combinations are
allowed for configurations of 256, 512, 768 MB, and 1 GB.
NVRAM Single chip of either PPROM or StrataFlash 16 MB
Characteristic Specification
Primary line
voltages 110-127 V Printer - (90 - 135 V) 13 amp circuit
220-240 V Printer - (198 - 254 V) 7-8 amp circuit
Primary line
voltage
frequency
range 100-120 V Printer - 50/60 Hz + 3
Hz
220-240 V Printer - 50/60 Hz + 3
Hz
NOTE Power the printer directly
from the wall outlet. Do not
use “Power Strips” as they
may limit available current.
In-rush
Current
100A, and 10m sec (half cycle) or less. at rated voltage: ±10%
Power
consumption
at rated
voltage input Mode
Print Mode
Ready Mode
Sleep Mode
Condition
Maximum
Fuser On
Fuser Off
100/120 VAC
1300 W or less
180 W or less
45 W or less
220/240 VAC
1300 W or less
180 W or less
45 W or less