Xerox Phaser 6360 Service Manual Download Page 297

Page: 297 / 564

Phaser 6300/6350/6360 Color Laser Printer Service Manual

8-21

Service Parts Disassembly

Universal Tray

Retard Assembly (PL2.1.12)

Remove the tray.

Release the 2 tabs at the left and right of the Turn Chute by pushing
inward and open the chute.

Rotate the Retard Holder 90 degrees.

Slide the Retard Assembly to the left to remove it from the 2 bosses, and
then lift upward.

s6360-138

Summary of Contents for Phaser 6360





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Phaser 6360

Reviews:

Related manuals for Phaser 6360

Brands by name

Popular brands

Xerox Phaser 6360, Service Manual

Search results

Summary of Contents for Phaser 6360

Reviews:

Related manuals for Phaser 6360

Brands by name

Popular brands