manualshive.com logo in svg

Xerox Phaser 6360, Service Manual, Page: 397 / 564

Share
Download
Xerox Phaser 6360 Service Manual Download Page 397

Phaser 6300/6350/6360 Color Laser Printer Service Manual

8-121

Service Parts Disassembly

OPTFDR 2 Harness (PL12.3.1)

1.

Separate the 1100-Sheet Feeder from the printer (page 8-112).

2.

Remove the Front Covers (page 8-113).

3.

Remove the Right Cover (page 8-115).

4.

Remove connector (P/J83) on the upper Circuit Board HCF.

5.

Remove the OPTFDR 2 Harness from clamps.

6.

Release two hooks that secure (J172), and remove OPTFDR 2 Harness.

s6360-258

Summary of Contents for Phaser 6360





















































































































































































































































































































































































































































































































































































Reviews:

No comments