manualshive.com logo in svg

Xerox Phaser 6360, Service Manual, Page: 360 / 564

Share
Download
Xerox Phaser 6360 Service Manual Download Page 360

8-84

Phaser 6300/6350/6360 Color Laser Printer Service Manual

Service Parts Disassembly

CRUM Reader (PL7.2.12)

1.

Remove the Top Main Cover (page 8-11).

Note

Control toner spillage by replacing the cartridges after removing the Top 
Main Cover.

2.

Remove the Right Side Cover (page 8-14).

3.

Remove the Left Side Cover (page 8-15).

4.

Remove the Rear Cover (page 8-17).

5.

Remove the 2 wires (red) from the harness guides on the CRUM Reader.

6.

Remove the screw (metal, 6 mm) and the screw (self-tapping, plastic 10 
mm) that secure each end of the CRUM Reader to the frame.

7.

Remove the 4 screws (self-tapping, plastic 10 mm) that secure the Toner 
Cartridge Holders to the CRUM Reader.

8.

Release the boss on each Toner Cartridge Holder from the CRUM 
Reader.

 

s6360-367

HVPS

Summary of Contents for Phaser 6360





















































































































































































































































































































































































































































































































































































Reviews:

No comments