Xerox Phaser 5335, User Manual

Page: 93 / 230

5.1 Overview of the Common Menus
75
Changing the Settings
Basic Procedure
To display a menu screen or to move up and down the menus, use the following buttons on
the control panel.
Note
• Once you save a value by pressing the <OK/Eject> button, an asterisk "*" appears next to the
value. To change the value, return to the initial screen and repeat the preceding steps.
• If the menu screen is left idle for 3 minutes, the display returns to the print screen. Any incomplete
setting on the menu screen made 3 minutes before becomes invalid.
Resetting a Value to Its Default
To reset a value to its default, display the value and press the < > and < > buttons
simultaneously. The value changes to its factory setting. To accept the value, press the
<OK/Eject> button.
Ready to print Menu
Print Language
Menu
Admin Menu
Admin Menu
Network / Port
Port Status
Enable
Port Status
Enable *
(print screen) (menu screen)
Press to display the menu items in the same hierarchy
Press to display the menu screen
< >: Press to display a lower hierarchy
< >: Press to display a higher hierarchy
(" * " appears next to the
option selected)
Press to accept
the selection
Press to close the menu screen
<Menu>
<Menu>
<OK/Eject>
< >
< >
< >
< >
(option selection screen)