Xerox Phaser 5335, User Manual

Page: 124 / 230

106
5 Control Panel Menus
[Tray Priority]
[Paper Size]
Printer Settings
Tray Priority
Tray Priority
1st
Tray Priority
2nd
Tray Priority
3rd
Setting Item Description
2nd to 5th
Sets the priority order of the paper trays. This setting will be used by the Auto
Tray Selection feature. You cannot assign a priority order to Tray 1 (Bypass
Tray).
• [Tray 2] to [Tray 5]
Sets the priority order of the paper trays. By default, the priority order of the
trays are:
tray 2, tray 3, tray 4, and tray 5
Note
• You cannot assign the same priority to more than one tray. The [3rd] tray
must be a tray other than the [2nd] tray, and the [4th] tray must be a tray
other than the [2nd] and [3rd] trays. The remaining tray will be the [5th] tray.
• [Tray Priority] appears only when the optional sheet feeders are installed.
Printer Settings
Paper Size
Paper Size
Tray 1 A4-P*
Paper Size
Tray 2 A4-P*
Paper Size
Tray 3 A4-P*
Paper Size
Tray 4 A4-P*
Paper Size
Tray 5 A4-P*
Setting Item Description
[Tray 2] to
[Tray 5]
Sets the paper size of the paper loaded in each paper tray.
• [A4-P] (default), [11x17], [8.5x13], [8.5x14], [7.2x10.5], [5.5x8.5], [8.5x11],
[4.1x9.5], [3.9x7.5], [110x220mm], [162x229mm], [100x148mm],
[148x200mm], [120x235mm], [105x235mm]
• [Custom]
Sets the length and width of the paper.
When [Custom] is selected, set the orientation of the paper to [Portrait (Y)] or
[Landscape (X)].
Note
• The display only shows the trays that are actually installed on the printer.
• For details on how to set custom paper sizes, refer to "Changing the Paper
Types of the Trays" (P. 68).