Xerox Nuvera 288 User Manual And Training Aid Download

Page: 174 / 256

file:///C|/Documents%20and%20Settings/Miz%20B/My%...GTA/Nuvera%209.0%20UGTA_FINAL/English/spec_40.htm (1 of 4)8/13/2008 4:44:15 PM

Multifunction Finisher (MFF) Specifications

The Multifunction Finisher offers the basic publishing option on the Xerox Nuvera EA Production System. It is the only finisher in the

configuration and can not be followed by any other finishing devices. It provides stacking and stapling capabilities as well as the ability

to make booklets and trifold documents.

There are two MFF models available.

Using the MFF

Go to

Using the Multifunction Finisher Module

for information on how to use the MFF.

Specifications

●

The

Professional

is a finisher that provides high capacity collating, stacking and stapling. It also allows the ability to make

booklets and trifold documents. This model consists of a Top Tray for collecting or purging sheets, a Main Tray and a Bottom

(Booklet) Tray.

●

The

Pro Plus

is the Professional model with added functionality provided in the Interface Module area. The Interface Module

contains a sheet insertion module as well as a hole punch module. The post process insertion capability of the MFF Pro Plus

can insert covers, preprinted tabs and colored paper. The hole punch module offers either a 2 and 3 Hole Paper Punch or a 2

and 4 Hole Paper Punch that allows you to punch 2, 3 or 4 holes in the printed document, depending on the paper punch

installed and the finishing hole punch option selected.

MFF Professional

MFF Pro Plus

Top Tray

250 sheets of 20 lb bond (75 gsm) or equivalent

Output to the Top Tray is delivered with Side-1 down and sets are not

offset. It can be set as a destination tray for non-stapled jobs. Sheets less

than 7 inches in the process direction or 8 inches in the cross-process

direction will automatically go to the Top Tray. The Top Tray also

receives sheets that are purged from the system.

Same

Bottom/Booklet Tray

250 sheets of 20 lb bond (75 gsm) or equivalent

Output to the Top Tray is delivered with Side-1 down and sets are not

offset. It can be set as a destination tray for non-stapled jobs. Sheets less

than 7 inches in the process direction or 8 inches in the cross-process

direction will automatically go to the Top Tray. The Top Tray also

receives sheets that are purged from the system.

Does not accept hole

punched finishing

output

Insertion Tray

Not available

200 sheets of 20 lb

bond (75 gsm) or

equivalent

56-220 gsm

Delivers output to all

3 trays

Main Tray/Stacker Capacity

3000 sheets of 20 lb bond (75 gsm) or equivalent

The stack limit can be set from the UI for each BFM independently.

Stapled sets with <15 sheets are limited to 100 sets.

The Stacker is the output tray for receiving compiled stapled and

unstapled sets as well as single sheets. Output is normally delivered with

side-1 down and sets can be offset.

Same

Home

Resources

Search

Index

System Tour

Maintenance

Problem Solving

About this Site

174 of 256

Summary of Contents for Nuvera 288

































































































































































































































































Search results

Summary of Contents for Nuvera 288

Reviews:

Related manuals for Nuvera 288

Brands by name

Popular brands

Xerox Nuvera 288, User Manual And Training Aid

Search results

Summary of Contents for Nuvera 288

Reviews:

Related manuals for Nuvera 288

Brands by name

Popular brands