Xerox Nuvera 288 User Manual And Training Aid Download

Page: 6 / 256

file:///C|/Documents%20and%20Settings/Miz%20B/My%2...uvera%209.0%20UGTA_FINAL/English/hdi_useDoc_00.htm (1 of 2)8/13/2008 2:22:34 PM

About this Site

There are several features in this online user guide that you should be familiar with in order to quickly gain knowledge about the Xerox

Nuvera.

Most important is that you be aware of the

symbols

and

type conventions

used in this site to draw your attention to crucial information.

These are used to help ensure your physical safety and proper operation of the machine.

This site is designed to support popular modern browsers. If you have problems viewing this site, or have an older version of a browser,

consult the

supported browsers

page or the

recommended screen display

page for more information.

Ways to distribute this information electronically

Since this Electronic Customer documentation (ECD) is HTML-based, it can be viewed through a modern browser. The ECD files can

be accessed:

To place this ECD on a local drive or intranet web server, follow these basic steps:

Printing topics

Though the UGTA is designed to be an online guide, you can print topics as needed.

To print the entire guide or a range of pages

Select and open the following PDF of the UGTA. Select the Bookmarks tab to view all of the topics within the guide. Select [

File: Print

]

or the

Print icon

in your browser's toolbar. From the Print window, locate the page range area and select

All

to print the entire guide or

enter a range of pages in the From and To fields. Click <

> to print.

Xerox Nuvera User Guide and Training Aid

To print the page you are currently viewing

To print only the page you are currently viewing, simply select [

File: Print

] or the

Print icon

in your browser's toolbar. From the Print

window, click <

Print

Flash and Video components

The Flash components are not printable. Neither are the videos. However, should you find yourself unable to remember what a

particular button is for while standing at the machine, you can consult the online help for assistance.

●

Directly off of the cd at the user's PC, Mac, or Unix desktop system.

●

From the user's local hard drive.

●

From the user's intranet server.

1. Copy the "ecd_source_code" directory.
2. Paste the directory on a designated hard drive; either local or on a server.
3. To launch the ECD, set the default page as "home.htm". Contact your System Administrator if you need assistance

configuring this system on a local or intranet server drive.

Home

Resources

Search

Index

How Do I?

System Tour

Maintenance

Problem Solving

TIP:

By default, your browser may include its own header and footer information (such as number of pages, file path, date, etc.)

on the printed page. To remove this:

1. Click [

File: Page Setup

2. In the

Headers and Footers

field, clear both of the text boxes.

3. Click <

About this Site

6 of 256

Summary of Contents for Nuvera 288

































































































































































































































































Search results

Summary of Contents for Nuvera 288

Reviews:

Related manuals for Nuvera 288

Brands by name

Popular brands

Xerox Nuvera 288, User Manual And Training Aid

Search results

Summary of Contents for Nuvera 288

Reviews:

Related manuals for Nuvera 288

Brands by name

Popular brands